Header Rewrite Plugin¶
This plugin allows you to modify arbitrary headers based on defined rules, for both requests and responses.
Purpose¶
Remapping an incoming client request to an origin server is at the heart of what we use Traffic Server for, but often we need to do more to requests than just change their destination according to simple rewriting rules against the URL.
We may need to direct requests to different origins based on a client cookie.
Our origins might return error response codes which are a little too customized and we want to condense the possible values to just the official codes.
We might want to strip a set of internal-use or debugging related HTTP headers from responses before sending them to clients, unless the original request had its own special header indicating that they should be retained.
Or perhaps we want to redirect certain requests differently when they come from
a known group of IP addresses (say, our developers' office network) and we have
a file on our proxy caching servers called /var/developertesting. (Stranger
QA methods exist.)
Maybe we want to deny access to a resource with an HTTP 403 if the client
connected to Traffic Server over a particular port, used HEAD instead of GET,
doesn't list Spanish (Paraguay dialect) in their Accept-Language header,
and either the origin server replied with 304 or we randomly generate an
integer between 0 and 500 and get back anything greater than 290.
These more complicated transformations of requests and responses (even that last one) are made possible by this plugin.
Installation¶
This plugin is considered stable and is included with Traffic Server by default. There are no special steps necessary for its installation.
Configuration¶
Header rewrite configurations, the actual conditions and operations that make up the activity performed by the plugin, are specified in external files and not in-line with the various mapping (and remapping) rules you may have configured for your proxy. The location of this file is arbitrary, as long as the Traffic Server processes have permissions to read it, though you may find it useful to keep it in the same location as your other proxy configuration files.
The paths given to the configuration file(s) may be absolute (leading with a
/ character), or they may be relative to the Traffic Server configuration directory.
There are two methods for enabling this plugin, based on whether you wish it to operate globally on every request that passes through your proxy, or only on some subset of the requests by enabling it only for specific mapping rules.
Enabling Globally¶
This plugin may be enabled globally, so that the conditions and header
rewriting rules are evaluated for every request made to your Traffic Server instance.
This is done by adding the following line to your plugin.config:
header_rewrite.so [--geo-db-path=path/to/geoip.db] config_file_1.conf config_file_2.conf ...
You may specify multiple configuration files. Their rules will be evaluated in the order the files are listed.
The plugin takes an optional switch --geo-db-path. If MaxMindDB support has
been compiled in, use this switch to point at your .mmdb file. This also applies to
the remap context.
Enabling Per-Mapping¶
Alternatively, the plugin can be enabled for specific mapping rules, by
modifying the relevant entries in your remap.config:
map http://a http://b @plugin=header_rewrite.so @pparam=rules1.conf ...
As with the global method above, multiple configuration files may be listed,
each with its own @pparam=<file> and their contents will be evaluated in
the order the files were specified.
Each ruleset that is configured per-mapping should have a special
Hook Conditions defined. Without a defined hook, these rulesets will use the
REMAP_PSEUDO_HOOK.
Rewriting Rules¶
Header rewriting rules consist of zero or more Conditions followed by one or more Operators. Conditions are used to limit the requests which will be affected by the operator(s). Additionally, both conditions and operators may have flags which modify their behavior.
A complete rule, consisting of two conditions and a single operator might look like the following:
cond %{STATUS} >399 [AND]
cond %{STATUS} <500
set-status 404
Which converts any 4xx HTTP status code from the origin server to a 404. A response from the origin with a status of 200 would be unaffected by this rule.
Conditions¶
Conditions are used as qualifiers, causing the associated operators to only be evaluated if the condition(s) are met. Conditions all take the following form:
cond %{<condition name>[:<argument>]} <operand> [<flags>]
Every condition begins with the literal string cond to indicate that this
line is a condition, not an operator. This is followed by the condition name,
inside curly braces and preceded by a percent sign (e.g. %{TRUE} for the
condition named TRUE). Some condition names take an argument. Header
conditions, for example, take the name of the header in question, and cookie
conditions take the name of the cookie. For these, the condition name is
followed by a colon and the argument value (e.g. %{HEADER:User-Agent} for a
header condition against the User-Agent header).
The operand of a condition provides a value, pattern, or range against which to match. The format is described in Condition Operands below.
Finally, a condition may optionally have various flags associated with it. These are described in Condition Flags below.
The following sections list all of the condition types currently supported. For
increased clarity in their usage, the optional [<flags>] portion of the
condition is omitted from all of the examples.
ACCESS¶
cond %{ACCESS:<path>}
Returns true if Traffic Server was able to successfully update the access time on the
file at <path>. This condition will return false if the file does not exist
or Traffic Server cannot access it for any other reason.
CACHE¶
cond %{CACHE} <operand>
This condition provides the server's cache lookup results to inform headers where the requested data was generated from. The cache values are:
Value
Description
none
No cache lookup was attempted.
miss
The object was not found in the cache.
hit-stale
The object was found in the cache, but it was stale.
hit-fresh
The object was fresh in the cache.
skipped
The cache lookup was skipped.
CLIENT-HEADER¶
cond %{CLIENT-HEADER:<name>} <operand>
Value of the header <name> from the original client request (regardless of
the hook context in which the rule is being evaluated). Note that some headers
may appear in an HTTP message more than once. In these cases, the value of the
header operated on by this condition will be a comma separated string of the
values from every occurrence of the header. More details are provided in
Repeated Headers below.
CLIENT-URL¶
cond %{CLIENT-URL:<part>} <operand>
The URL of the original request. Regardless of the hook context in which the
rule is evaluated, this condition will always operate on the original, unmapped
URL supplied by the client. The <part> may be specified according to the
options documented in URL Parts.
Note that the HOST <part> of the CLIENT-URL might not be set until the remap
phase of the transaction. This happens when there is no host in the incoming URL
and only set as a host header. During the remap phase the host header is copied
to the CLIENT-URL. Use CLIENT-HEADER:Host if you are going to match the host.
CIDR¶
set-header @Client-CIDR %{CIDR:24,48}
This condition takes the client IP, and applies the provided CIDR style masks to the IP, before producing a string. The typical use of this conditions is as above, producing a header that contains a IP representation which has some privacy properties. It can of course also be used as a regular condition, and the output is a string that can be compared against. The two optional arguments are as follows:
IPv4-Mask Length, in bits, of the IPv4 address to preserve. Default: 24
IPv6-Mask Length, in bits, of the IPv6 address to preserve. Default: 48
The two arguments, if provided, are comma separated. Valid syntax includes:
%{CIDR} Defaults to 24,48 (as above)
%{CIDR:16} IPv4 CIDR mask is 16 bits, IPv6 mask is 48
%{CIDR:18,42} IPv4 CIDR mask is 18 bits, IPv6 mask is 42 bits
A typical use case is to insert the @-prefixed header as above, and then use this header in a custom log format, rather than logging the full client IP. Another use case could be to make a special condition on a sub-net, e.g.:
cond %{CIDR:8} ="8.0.0.0"
set-header X-Is-Eight "Yes"
cond %{CIDR:,8} ="fd00::" #note the IPv6 Mask is in the second position
set-header IPv6Internal "true"
This condition has no requirements other than access to the Client IP, hence, it should work in any and all hooks.
FROM-URL¶
cond %{FROM-URL:<part>} <operand>
In a remapping context, this condition matches against the source URL from
which the remapping was generated. This condition is valid only within
configurations provided through remap.config as described in Enabling
Per-Mapping above.
The <part> allows the operand to match against just a component of the URL,
as documented in URL Parts below.
GEO¶
cond %{GEO:<part>} <operand>
Perform a GeoIP lookup of the client-IP, using a 3rd party library and DB. Currently the MaxMind GeoIP and MaxMindDB APIs are supported. The default is to do a Country lookup, but the following qualifiers are supported:
%{GEO:COUNTRY} The country code (e.g. "US")
%{GEO:COUNTRY-ISO} The country ISO code (e.g. 225)
%{GEO:ASN} The AS number for the provider network (e.g. 7922)
%{GEO:ASN-NAME} A descriptive string of the AS provider
These operators can be used both as conditionals, as well as values for setting headers. For example:
cond %{SEND_RESPONSE_HDR_HOOK} [AND]
cond %{GEO:COUNTRY} =US
set-header ATS-Geo-Country %{GEO:COUNTRY}
set-header ATS-Geo-Country-ISO %{GEO:COUNTRY-ISO}
set-header ATS-Geo-ASN %{GEO:ASN}
set-header ATS-Geo-ASN-NAME %{GEO:ASN-NAME}
HEADER¶
cond %{HEADER:<name>} <operand>
Value of the header <name> from either the original client request or the
origin server's response, depending upon the hook context in which the rule is
being evaluated. Consult Requests vs. Responses for more information on how
to distinguish the two, as well as enforce that a rule is always evaluated in
the desired context.
Note that some headers may appear in an HTTP message more than once. In these cases, the value of the header operated on by this condition will be a comma separated string of the values from every occurrence of the header. Refer to Repeated Headers for more information.
If you wish to use a client request header, regardless of hook context, you may consider using the CLIENT-HEADER condition instead.
HTTP-CNTL¶
cond %{HTTP-CNTL:<controller>}
This condition allows you to check the state of various HTTP controls. The controls
are of the same name as for set-http-cntl. This condition returns a true or
false value, depending on the state of the control. For example:
cond %{HTTP-CNTL:LOGGING} [NOT]
would only continue evaluation if logging is turned off.
ID¶
cond %{ID:REQUEST} >100
This condition provides access to three identifier values that ATS uses internally for things like logging and debugging. Since these are IDs, they are mostly useful as a value (operand) to other operators. The three types of IDs are
%{ID:REQUEST} A unique, sequence number for the transaction
%{ID:PROCESS} A UUID string, generated every time ATS restarts
%{ID:UNIQUE} The combination of the previous two IDs
Now, even though these are conditionals, their primary use are as value arguments to another operator. For example:
set-header ATS-Req-UUID %{ID:UNIQUE}
INBOUND¶
cond %{INBOUND:TLS} /./
This condition provides access to information about the inbound (client, user agent) connection to ATS. The data that can be checked is
%{INBOUND:LOCAL-ADDR} The local (ATS) address for the connection. Equivalent to %{IP:INBOUND}.
%{INBOUND:LOCAL-PORT} The local (ATS) port for the connection.
%{INBOUND:REMOTE-ADDR} The client address for the connection. Equivalent to %{IP:CLIENT}.
%{INBOUND:REMOTE-PORT} The client port for the connection.
%{INBOUND:TLS} The TLS protocol if the connection is over TLS, otherwise the empty string.
%{INBOUND:H2} The string "h2" if the connection is HTTP/2, otherwise the empty string.
%{INBOUND:IPV4} The string "ipv4" if the connection is IPv4, otherwise the empty string.
%{INBOUND:IPV6} The string "ipv6" if the connection is IPv6, otherwise the empty string.
%{INBOUND:IP-FAMILY} The IP family, either "ipv4" or "ipv6".
%{INBOUND:STACK} The full protocol stack separated by ','.
All of the tags generated by this condition are from the protocol stack tags.
Because of the implicit match rules, using these as conditions is a bit unexpected. The condition
listed above will be true if the inbound connection is over TLS because %{INBOUND:TLS} will only
return a non-empty string for TLS connections. In contrast
cond %{INBOUND:TLS}
will be true for non-TLS connections because it will be true when %{INBOUND:TLS} is the empty
string. This happens because the default matching is equality and the default value the empty
string. Therefore the condition is treated as if it were
cond %{INBOUND:TLS}=""
which is true when the connection is not TLS. The arguments H2, IPV4, and IPV6 work the
same way.
As a special matcher, the inbound IP addresses can be matched against a list of IP ranges, e.g.
cond %{INBOUND:REMOTE-ADDR} {192.168.201.0/24,10.0.0.0/8}
Note that this will not work against the non-IP based conditions, such as the protocol families, and the configuration parser will error out. The format here is very specific, in particular no white spaces are allowed between the ranges.
IP¶
cond %{IP:<part>} <operand>
This is one of four possible IPs associated with the transaction, with the possible parts being
%{IP:CLIENT} Client's IP address. Equivalent to %{INBOUND:REMOTE-ADDR}.
%{IP:INBOUND} ATS's IP address to which the client connected. Equivalent to %{INBOUND:LOCAL-ADDR}
%{IP:SERVER} Upstream (next-hop) server IP address (typically origin, or parent)
%{IP:OUTBOUND} ATS's outbound IP address, that was used to connect upstream (next-hop)
Note that both %{IP:SERVER} and %{IP:OUTBOUND} can be unset, in which case the empty string is returned. The common use for this condition is actually as a value to an operator, e.g.
cond %{SEND_RESPONSE_HDR_HOOK}
set-header X-Client-IP %{IP:CLIENT}
set-header X-Inbound-IP %{IP:INBOUND}
set-header X-Server-IP %{IP:SERVER}
set-header X-Outbound-IP %{IP:OUTBOUND}
As a special matcher, the IP can be matched against a list of IP ranges, e.g.
cond %{IP:CLIENT} {192.168.201.0/24,10.0.0.0/8}
The format here is very specific, in particular no white spaces are allowed between the ranges.
INTERNAL-TRANSACTION¶
cond %{INTERNAL-TRANSACTION}
Returns true if the current transaction was internally-generated by Traffic Server (using
TSHttpTxnIsInternal()). These transactions are not initiated by
external client requests, but are triggered (often by plugins) entirely within
the Traffic Server process.
METHOD¶
cond %{METHOD} <operand>
The HTTP method (e.g. GET, HEAD, POST, and so on) used by the
client for this transaction.
NEXT-HOP¶
cond %{NEXT-HOP:<part>} <operand>
Returns next hop current selected parent information. The following qualifiers are supported:
%{NEXT-HOP:HOST} Name of the current selected parent.
%{NEXT-HOP:PORT} Port of the current selected parent.
Note that the <part> of NEXT-HOP will likely not be available unless
an origin server connection is attempted at which point it will available
as part of the SEND_REQUEST_HDR_HOOK.
For example:
cond %{SEND_REQUEST_HDR_HOOK} [AND]
cond %{NEXT-HOP:HOST} =www.firstparent.com
set-header Host vhost.firstparent.com
cond %{SEND_REQUEST_HDR_HOOK} [AND]
cond %{NEXT-HOP:HOST} =www.secondparent.com
set-header Host vhost.secondparent.com
NOW¶
cond %{NOW:<part>} <operand>
This is the current time, in the local timezone as set on the machine, typically GMC. Without any further qualifiers, this is the time in seconds since EPOCH aka Unix time. Qualifiers can be used to give various other values, such as year, month etc.
%{NOW:YEAR} Current year (e.g. 2016)
%{NOW:MONTH} Current month (0-11, 0 == January)
%{NOW:DAY} Current day of the month (1-31)
%{NOW:HOUR} Current hour (0-23, in the 24h system)
%{NOW:MINUTE} Current minute (0-59}
%{NOW:WEEKDAY} Current weekday (0-6, 0 == Sunday)
%{NOW:YEARDAY} Current day of the year (0-365, 0 == Jan 1st)
RANDOM¶
cond %{RANDOM:<n>} <operand>
Generates a random integer from 0 up to (but not including) <n>. Mathematically, [0,n) or 0 <= r < n.
STATUS¶
cond %{STATUS} <operand>
Numeric HTTP status code of the response.
TO-URL¶
cond %{TO-URL:<part>} <operand>
In a remapping context, this condition matches against the target URL to which
the remapping is directed. This condition is valid only within configurations
provided through remap.config as described in Enabling Per-Mapping
above.
The <part> allows the operand to match against just a component of the URL,
as documented in URL Parts below.
TRUE / FALSE¶
cond %{TRUE}
cond %{FALSE}
These conditions always return a true value and a false value, respectively. The true condition is implicit in any rules which specify no conditions (only operators).
TXN-COUNT¶
cond %{TXN-COUNT} <operand>
Returns the number of transactions (including the current one) that have been sent on the current client connection. This can be used to detect if the current transaction is the first transaction.
URL¶
cond %{URL:<part>} <operand>
The complete URL of the current transaction. This will automatically choose the most relevant URL depending upon the hook context in which the condition is being evaluated.
Refer to Requests vs. Responses for more information on determining the
context in which the transaction's URL is evaluated. The <part> may be
specified according to the options documented in URL Parts.
SSN-TXN-COUNT¶
cond %{SSN-TXN-COUNT} <operand>
Returns the number of transactions between the Traffic Server proxy and the origin server from a single session. Any value greater than zero indicates connection reuse.
TCP-INFO¶
cond %{<name>}
add-header @PropertyName "%{TCP-INFO}"
This operation records TCP Info struct field values as an Internal remap as well as global header at the event hook specified by the condition. Supported hook conditions include TXN_START_HOOK, SEND_RESPONSE_HEADER_HOOK and TXN_CLOSE_HOOK in the Global plugin and REMAP_PSEUDO_HOOK, SEND_RESPONSE_HEADER_HOOK and TXN_CLOSE_HOOK in the Remap plugin. Conditions supported as request headers include TXN_START_HOOK and REMAP_PSEUDO_HOOK. The other conditions are supported as response headers. TCP Info fields currently recorded include rtt, rto, snd_cwnd and all_retrans. This operation is not supported on transactions originated within Traffic Server (for e.g using the Traffic Server TSHttpTxnIsInternal())
Condition Operands¶
Operands provide the means to restrict the values, provided by a condition, which will lead to that condition evaluating as true. There are currently four types supported:
Operand |
Description |
|---|---|
/regex/ |
Matches the condition's provided value against the regular expression. Start the regex with (?i) to flag it for a case insensitive match, e.g. /(?i)regex/ will match ReGeX. |
<string |
Matches if the value from the condition is lexically less than string. |
>string |
Matches if the value from the condition is lexically greater than string. |
=string |
Matches if the value from the condition is lexically equal to string. |
The absence of an operand for conditions which accept them simply requires that a value exists (e.g. the content of the header is not an empty string) for the condition to be considered true.
Condition Flags¶
The condition flags are optional, and you can combine more than one into a comma-separated list of flags. Note that whitespaces are not allowed inside the brackets:
Flag |
Description |
|---|---|
AND |
Indicates that both the current condition and the next must be true. This is the default behavior for all conditions when no flags are provided. |
NOT |
Inverts the condition. |
OR |
Indicates that either the current condition or the next one must be
true, as contrasted with the default behavior from |
NOCASE |
Indicates that the string comparison, or regular expression, should be case-insensitive. The default is to be case-sensitive. |
Operators¶
Operators are the part of your header rewriting rules which actually modify the header content of your requests and responses. They are always the final part of a rule, following any of the conditions which whittled down the requests and responses to which they will be applied.
Multiple operators may be specified for a single rule, and they will be executed in the order listed. The end of the rule is marked either by the end of the configuration file or the next appearance of a condition (whichever occurs first).
The following operators are available:
add-header¶
add-header <name> <value>
Adds a new <name> header line with the contents <value>. Note that this
operator can produce duplicate headers if one of <name> already exists, or
your configuration supplies multiple instances of this operator in different
rules which are all invoked. This is not an issue for headers which may safely
be specified multiple times, such as Set-Cookie, but for headers which may
only be specified once you may prefer to use set-header instead.
The header's <value> may be specified as a literal string, or it may take
advantage of String concatenations to calculate a dynamic value
for the header.
counter¶
counter <name>
Increments an integer counter called <name> every time the rule is invoked.
The counter is initialized at 0 if it does not already exist. The name you
give your counter is arbitrary, though it is strongly advisable to avoid
conflicts with existing Traffic Server statistics.
This counter can be viewed at any time through the standard statistics APIs, including the Stats Over HTTP plugin.
Counters can only increment by 1 each time this operator is invoked. There is
no facility to increment by other amounts, nor is it possible to initialize the
counter with any value other than 0. Additionally, the counter will reset
whenever Traffic Server is restarted.
no-op¶
no-op
This operator does nothing, takes no arguments, and has no side effects.
rm-destination¶
rm-destination <part>
Removes individual components of the remapped destination's address. When
changing the remapped destination, <part> should be used to indicate the
component that is being modified (see URL Parts). Currently the only valid
parts for rm-destination are QUERY, PATH, and PORT.
For the query parameter, this operator takes an optional second argument,
which is a list of query parameters to remove (or keep with [INV] modifier).
rm-destination QUERY <comma separate list of query parameter>
rm-header¶
rm-header <name>
Removes the header <name>.
run-plugin¶
run-plugin <plugin-name>.so "<plugin-argument> ..."
This allows to run an existing remap plugin, conditionally, from within a header rewrite rule.
set-body¶
set-body <text>
Sets the body to <text>. Can also be used to delete a body with "". This is only useful when overriding the origin status, i.e.
intercepting/pre-empting a request so that you can override the body from the body-factory with your own.
set-body-from¶
set-body-from <URL>
Will call <URL> (see URL in URL Parts) to retrieve a custom error response
and set the body with the result. Triggering this rule on an OK transaction will
send a 500 status code to the client with the desired response. If this is triggered
on any error status code, that original status code will be sent to the client.
Note: This config should only be set using READ_RESPONSE_HDR_HOOK
An example config would look like
cond %{READ_RESPONSE_HDR_HOOK} set-body-from http://www.example.com/second
Where http://www.example.com/second is the destination to retrieve the custom response from.
This can be enabled per-mapping or globally.
Ensure there is a remap rule for the second endpoint as well!
An example remap config would look like
map /first http://www.example.com/first @plugin=header_rewrite.so @pparam=cond1.conf map /second http://www.example.com/second
set-config¶
set-config <name> <value>
Allows you to override the value of a Traffic Server configuration variable for the
current connection. The variables specified by <name> must be overridable.
For details on available Traffic Server configuration variables, consult the
documentation for records.yaml. You can read more about overridable
configuration variables in the developer's documentation for
TSHttpOverridableConfig.
set-conn-dscp¶
set-conn-dscp <value>
When invoked, sets the client side DSCP value for the current
transaction. The <value> should be specified as a decimal integer.
set-conn-mark¶
set-conn-mark <value>
When invoked, sets the client side MARK value for the current
transaction. The <value> should be specified as a decimal integer.
Requires at least Linux 2.6.25.
set-debug¶
set-debug
When invoked, this operator enables the internal transaction debugging flag
(via TSHttpTxnDebugSet()), which causes debug messages to be printed to
the appropriate logs even when the debug tag has not been enabled. For
additional information on Traffic Server debugging statements, refer to
Debug Tags in the developer's documentation.
Note: This operator is deprecated, use the set-http-cntl operator instead,
with the TXN_DEBUG control.
set-destination¶
set-destination <part> <value>
Modifies individual components of the remapped destination's address. When
changing the remapped destination, <part> should be used to indicate the
component that is being modified (see URL Parts), and <value> will be
used as its replacement. You must supply a non-zero length value, otherwise
this operator will be an effective no-op (though a warning will be emitted to
the logs if debugging is enabled).
set-header¶
set-header <name> <value>
Replaces the value of header <name> with <value>, creating the header
if necessary.
The header's <value> may be a literal string, or take advantage of
String concatenations to calculate a dynamic value for the header.
set-redirect¶
set-redirect <code> <destination>
When invoked, sends a redirect response to the client, with HTTP status
<code>, and a new location of <destination>. If the QSA flag is
enabled, the original query string will be preserved and added to the new
location automatically. This operator supports String concatenations for
<destination>. This operator can only execute on the
READ_RESPONSE_HDR_HOOK (the default when the plugin is global), the
SEND_RESPONSE_HDR_HOOK, or the REMAP_PSEUDO_HOOK.
set-status¶
set-status <code>
Modifies the HTTP status code used for the
response. <code> must be a valid status code. This operator will also
update the reason in the HTTP response, based on the code you have chosen. If
you wish to override that with your own text, you will need to invoke the
set-status-reason operator after this one.
set-status-reason¶
set-status-reason <reason>
Modifies the HTTP response to use <reason> as the HTTP status reason,
instead of the standard string (which depends on the HTTP status code used).
set-timeout-out¶
set-timeout-out <type> <value>
Modifies the timeout values for the current transaction to <value>
(specified in milliseconds). The <type> must be one of the following:
active, inactive, connect, or dns.
skip-remap¶
skip-remap <value>
When invoked, and when <value> is any of 1, true, or TRUE, this
operator causes Traffic Server to abort further request remapping. Any other value and
the operator will effectively be a no-op.
Note: This operator is deprecated, use the set-http-cntl operator instead,
with the SKIP_REMAP control.
set-http-cntl¶
set-http-cntl <controller> <flag>
This operator lets you turn off (or on) the logging for a particular transaction.
The <flag> is any of 0, off, and false, or 1, on and true.
The available controllers are:
Controller |
Description |
|---|---|
LOGGING |
Turns off logging for the transaction (default: |
INTERCEPT_RETRY |
Allow intercepts to be retried (default: |
RESP_CACHEABLE |
Force the response to be cacheable (default: |
REQ_CACHEABLE |
Force the request to be cacheable (default: |
SERVER_NO_STORE |
Don't allow the response to be written to cache (default: |
TXN_DEBUG |
Enable transaction debugging (default: |
SKIP_REMAP |
Don't require a remap match for the transaction (default: |
Operator Flags¶
Operator flags are optional, are separated by commas when using more than one
for a single operator, and must not contain whitespace inside the brackets. For
example, an operator with the L flag would be written in this manner:
set-destination HOST foo.bar.com [L]
The flags currently supported are:
Flag |
Description |
|---|---|
L |
Last rule, do not continue. |
I |
Invert the semantics of the rules parameters |
QSA |
Append the results of the rule to the query string. |
String concatenations¶
You can concatenate values using strings, condition values and variable expansions on the same line.
add-header CustomHeader "Hello from %{IP:SERVER}:%{INBOUND:LOCAL-PORT}"
This is the new, generic form of setting header values. Unfortunately, string concatenation is not yet supported in conditionals.
Note: In versions prior to ATS v9.0.0, an alternative string expansion was available. those expansions are no longer available, but the following table can help migrations:
Old expansion variable |
Condition variable to use with concatenations |
|---|---|
%<proto> |
%{CLIENT-URL:SCHEME} |
%<port> |
%{CLIENT-URL:PORT} |
%<chi> |
%{IP:CLIENT}, %{INBOUND:REMOTE-ADDR} or e.g. %{CIDR:24,48} |
%<cqhl> |
%{CLIENT-HEADER:Content-Length} |
%<cqhm> |
%{METHOD} |
%<cque> |
%[CLIENT-URL} |
%<cquup> |
%{CLIENT-URL:PATH} |
URL Parts¶
Some of the conditions and operators which use a request or response URL as their target allow for matching against specific components of the URL. For example, the CLIENT-URL condition can be used to test just against the query parameters by writing it as:
cond %{CLIENT-URL:QUERY} <operand>
The URL part names which may be used for these conditions and actions are:
Part |
Description |
|---|---|
HOST |
Full hostname. |
PATH |
URL substring beginning with (but not including) the first |
PORT |
Port number. |
QUERY |
URL substring from the |
SCHEME |
URL scheme in use (e.g. |
URL |
The complete URL. |
As another example, a remap rule might use the set-destination operator to change just the hostname via:
cond %{HEADER:X-Mobile} = "foo"
set-destination HOST foo.mobile.bar.com [L]
Requests vs. Responses¶
Both HTTP requests and responses have headers, a good number of them with the
same names. When writing a rule against, for example, the Connection or
Via headers which are both valid in a request and a response, how can you
tell which is which, and how do you indicate to Traffic Server that the condition is
specifically and exclusively for a request header or just for a response
header? And how do you ensure that a header rewrite occurs against a request
before it is proxied?
Hook Conditions¶
In addition to the conditions already described above, there are a set of special hook conditions. Only one of these conditions may be specified per ruleset, and they must be the first condition listed. Which hook condition is used determines the context in which the ruleset is evaluated, and whether the other conditions will default to operating on the client request headers or the origin response (or cache response) headers.
Hook conditions are written just like the other conditions, except that none of them take any operands:
cond %{<name>}
Because hook conditions must be the first condition in a ruleset, the use of one forces the beginning of a new ruleset.
READ_REQUEST_HDR_HOOK¶
Evaluates as soon as the client request has been read, but prior to any further processing (including contacting origin servers or fetching objects from cache). Conditions and operators which adapt to matching or manipulating request or response entities (e.g. headers) depending on their context will all operate on the request variants when using this hook, as there is no response data yet.
This hook is not available to remap rules.
READ_REQUEST_PRE_REMAP_HOOK¶
For ruleset configurations provided via remap.config, this forces their
evaluation as soon as the request has been read, but prior to the remapping.
For all context-adapting conditions and operators, matching will occur against
the request, as there is no response data available yet.
This hook is not available to remap rules.
REMAP_PSEUDO_HOOK¶
Similar to READ_REQUEST_HDR_HOOK, but only available when used in a remap context, evaluates prior to SEND_REQUEST_HDR_HOOK and allows the rewrite to evaluate as part of the remapping.
Because this hook is valid only within a remapping context, for configuration
files shared by both the global plugin.config and individual remapping
entries in remap.config, this hook condition will force the subsequent
ruleset(s) to be valid only for remapped transactions.
SEND_REQUEST_HDR_HOOK¶
Forces evaluation of the ruleset just prior to contacting origin servers (or fetching the object from cache), but after any remapping may have occurred.
READ_RESPONSE_HDR_HOOK¶
Rulesets evaluated within this context will process only once the origin server response has been read, but prior to Traffic Server sending that response to the client.
This is the default hook condition for all globally-configured rulesets.
SEND_RESPONSE_HDR_HOOK¶
Evaluates rulesets just prior to sending the client response, but after any cache updates may have been performed. This hook context provides a means to modify aspects of the response sent to a client, while still caching the original versions of those attributes delivered by the origin server.
TXN_START_HOOK¶
Rulesets are evaluated when Traffic Server receives a request and accepts it. This hook context indicates that a HTTP transaction is initiated and therefore, can only be enabled as a global plugin.
TXN_CLOSE_HOOK¶
Rulesets are evaluated when Traffic Server completes a transaction, i.e., after a response has been sent to the client. Therefore, header modifications at this hook condition only makes sense for internal headers.
Affected Conditions¶
The following conditions are affected by the hook context in which they are evaluated and will adjust using request or response entities automatically:
Affected Operators¶
The following operators are affected by the hook context in which they are evaluated and will adjust modifying request or response entities automatically:
Caveats¶
Repeated Headers¶
Some headers may appear more than once in a request or a response. When this occurs, all values will be collapsed into a single comma-delimited string before the conditions see them. This avoids the problem of determining which header instance out of several a condition's rule will be applied to, but it may introduce unexpected behavior in your operands.
For example, let us assume an origin response includes a header named X-Foo
which specifies a keyword of some sort. This header may appear zero or more
times and we wish to construct a HEADER condition that can handle this.
Condition A¶
This condition will match using a direct equality operand:
cond %{HEADER:X-Foo} =bar
Condition B¶
This condition will match using an unanchored regular expression:
cond %{HEADER:X-Foo} /bar/
Sample Headers¶
Both conditions A and B will match this response:
HTTP/1.1 200 OK
Date: Mon, 08 Feb 2016 18:11:30 GMT
Content-Length: 1234
Content-Type: text/html
X-Foo: bar
Only condition B will match this response:
HTTP/1.1 200 OK
Date: Mon, 08 Feb 2016 18:11:30 GMT
Content-Length: 1234
Content-Type: text/html
X-Foo: bar
X-Foo: baz
That is because the HEADER condition will see the value of X-Foo as
bar,baz. Condition B will still match this because the regular expression,
being unanchored, finds the substring bar. But condition A fails, as it is
expecting the value to be the exact string bar, nothing more and nothing
less.
例¶
Remove Origin Authentication Headers¶
The following ruleset removes any authentication headers from the origin response before caching it or returning it to the client. This is accomplished by setting the hook context and then removing the cookie and basic authentication headers.:
cond %{READ_RESPONSE_HDR_HOOK}
rm-header Set-Cookie
rm-header WWW-Authenticate
Count Teapots¶
Maintains a counter statistic, which is incremented every time an origin server has decided to be funny by returning HTTP 418:
cond %{STATUS} =418
counter plugin.header_rewrite.teapots
Normalize Statuses¶
For client-facing purposes only (because we set the hook context to just prior
to delivering the response back to the client, but after all processing and
possible cache updates have occurred), replaces all 4xx HTTP status codes from
the origin server with 404:
cond %{SEND_RESPONSE_HDR_HOOK}
cond %{STATUS} >399
cond %{STATUS} <500
set-status 404
Remove Cache Control to Origins¶
Removes cache control related headers from requests before sending them to an origin server:
cond %{SEND_REQUEST_HDR_HOOK}
rm-header Cache-Control
rm-header Pragma
Enable Debugging Per-Request¶
Turns on Traffic Server debugging statements for a transaction, but only when a special header is present in the client request:
cond %{READ_REQUEST_HDR_HOOK}
cond %{CLIENT-HEADER:X-Debug} =supersekret
set-debug
Remove Internal Headers¶
Removes special internal/development headers from origin responses, unless the client request included a special debug header:
cond %{CLIENT-HEADER:X-Debug} =keep [NOT]
rm-header X-Debug-Foo
rm-header X-Debug-Bar
Return Original Method in Response Header¶
This rule copies the original HTTP method that was used by the client into a custom response header:
cond %{SEND_RESPONSE_HDR_HOOK}
set-header X-Original-Method %{METHOD}
Useless Example From Purpose¶
Even that useless example from Purpose in the beginning of this document is possible to accomplish:
cond %{INBOUND:LOCAL-PORT} =8090
cond %{METHOD} =HEAD
cond %{CLIENT-HEADER:Accept-Language} /es-py/ [NOT]
cond %{STATUS} =304 [OR]
cond %{RANDOM:500} >290
set-status 403
Add Cache Control Headers Based on Origin Path¶
This rule adds cache control headers to CDN responses based matching the origin path. One provides a max age and the other provides a "no-cache" statement to two different file paths.
cond %{SEND_RESPONSE_HDR_HOOK}
cond %{CLIENT-URL:PATH} /examplepath1/
add-header Cache-Control "max-age=3600" [L]
cond %{SEND_RESPONSE_HDR_HOOK}
cond %{CLIENT-URL:PATH} /examplepath2\/examplepath3\/.*/
add-header Cache-Control "no-cache" [L]
Redirect when the Origin Server Times Out¶
This rule sends a 302 redirect to the client with the requested URI's Path and Query string when the Origin server times out or the connection is refused:
cond %{SEND_RESPONSE_HDR_HOOK}
cond %{STATUS} =502 [OR]
cond %{STATUS} =504
set-redirect 302 http://different_origin.example.com/%{CLIENT-URL:PATH} [QSA]
Check for existence of a header¶
This rule will modify the Cache-Control header, but only if it is not
already set to some value, and the status code is a 2xx:
cond %{READ_RESPONSE_HDR_HOOK} [AND]
cond %{HEADER:Cache-Control} ="" [AND]
cond %{STATUS} >199 [AND]
cond %{STATUS} <300
set-header Cache-Control "max-age=600, public"
Add HSTS¶
Add the HTTP Strict Transport Security (HSTS) header if it does not exist and the inbound connection is TLS:
cond %{READ_RESPONSE_HDR_HOOK} [AND]
cond %{HEADER:Strict-Transport-Security} ="" [AND]
cond %{INBOUND:TLS} /./
set-header Strict-Transport-Security "max-age=63072000; includeSubDomains; preload"
This is mostly used by being attached to a remap rule that maps to a host known to support TLS. If the parallel OUTBOUND supported is added then this could be done by checking for inbound TLS both outbound TLS in the SEND_REQUEST_HDR_HOOK. However this technique may be used for a non-TLS upstream if the goal is to require the user agent to connect to Traffic Server over TLS.
Close Connections for draining¶
When a healthcheck file is missing (in this example, /path/to/the/healthcheck/file.txt),
add a Connection: close header to have clients drop their connection,
allowing the server to drain. Although Connection header is only available on
HTTP/1.1 in terms of protocols, but this also works for HTTP/2 connections
because the header triggers HTTP/2 graceful shutdown. This should be a global
configuration.:
cond %{SEND_RESPONSE_HDR_HOOK}
cond %{ACCESS:/path/to/the/healthcheck/file.txt} [NOT,OR]
set-header Connection "close"
Use Internal header to pass data¶
In Traffic Server, a header that begins with @ does not leave Traffic Server. Thus, you can use
this to pass data to different Traffic Server systems. For instance, a series of remap rules
could each be tagged with a consistent name to make finding logs easier.:
cond %{REMAP_PSEUDO_HOOK}
set-header @PropertyName "someproperty"
(Then in logging.yaml, log %<{@PropertyName}cqh>)
Remove Client Query Parameters¶
The following ruleset removes any query parameters set by the client.:
cond %{REMAP_PSEUDO_HOOK}
rm-destination QUERY
Remove only a few select query parameters:
cond %{REMAP_PSEUDO_HOOK} rm-destination QUERY foo,bar
Keep only a few select query parameters -- removing the rest:
cond %{REMAP_PSEUDO_HOOK} rm-destination QUERY foo,bar [I]
Mimic X-Debug Plugin's X-Cache Header¶
This rule can mimic X-Debug plugin's X-Cache header by accumulating
the CACHE condition results to a header.:
cond %{SEND_RESPONSE_HDR_HOOK} [AND]
cond %{HEADER:All-Cache} ="" [NOT]
set-header All-Cache "%{HEADER:All-Cache}, %{CACHE}"
cond %{SEND_RESPONSE_HDR_HOOK} [AND]
cond %{HEADER:All-Cache} =""
set-header All-Cache %{CACHE}
Add Identifier from Server with Data¶
This rule adds an unique identifier from the server if the data is fresh from the cache or if the identifier has not been generated yet. This will inform the client where the requested data was served from.:
cond %{SEND_RESPONSE_HDR_HOOK} [AND]
cond %{HEADER:ATS-SRVR-UUID} ="" [OR]
cond %{CACHE} ="hit-fresh"
set-header ATS-SRVR-UUID %{ID:UNIQUE}
Apply rate limiting for some select requests¶
This rule will conditiionally, based on the client request headers, apply rate limiting to the request.:
cond %{REMAP_PSEUDO_HOOK} [AND]
cond %{CLIENT-HEADER:Some-Special-Header} ="yes"
run-plugin rate_limit.so "--limit=300 --error=429"